Wiring Processing - Wiring Harness Technology |
| Author : Suzhou Nachi Electronics Co., Ltd. Date : 2/26/2025 12:47:39 AM |
Friends who have mastered the production and manufacture of terminal lines understand the 4 process processes to ensure the quality of connecting lines, cutting, peeling, pressing terminals, tinning, and other processing processes (automatic dispensing machine, newline, etc.)
Wire cutting: The wire cutting machine is used to cut the wire to the required length. The automatic wire cutting machine is used to cut the wire. The deviation of peeling length is prohibited from exceeding the required tolerance range. Peeling: Adjust the cutting head and equipment program of the peeling machine to peel the wire. Crimping terminal: Select the riveting process, apply external force to the terminal to produce plastic deformation, so as to fix the cable insulation layer. Tinning: Control the solder temperature, solder the end of the wire. Automatic dispensing machine: Apply the heating glue of the automatic dispensing machine, wipe it on the RF connector plugged into the terminal, and then put it in the oven to control the temperature and time and other parameters for curing. Cable: Stranding will improve the anti-interference ability of the cable, the use of automatic cable machine to develop the cable, the cable range must exceed the terminal 1cm-2cm. |
